Peaq MUNET LINK PMN400-B Mode D'emploi page 25

Indicator light
• During setup and normal operation, the MUNET's indicator light provides
information on connection statuses.
LED colour
Red (Flashing)
Red (Flashing
quickly)
Red (Steady on) MUNET is in off mode.
Blue (Flashing)
Blue (Steady on) MUNET is on. MUNET is connected to a wireless network.
Blue (Flashing 3x) MUNET connected to Bluetooth.
Purple (Steady on) MUNET is in sleep mode.
Purple (Flashing
quickly)
Purple (Flashing 2x) MUNET is reaching its minimum or maximum volume level.
Purple (Flashing 3x) Identify device via App
Blue and (Alternating
Purple slowly)
Blue and (Blue
Purple flashing 2x,
then Purple
flashing)
Blue, (Alternating
Purple, slowly)
Red,
Purple
PMN400_A5_140108 (1.6).indb 25
What it means
MUNET is starting up.
MUNET is experiencing connection problems.
Error found.
MUNET is connecting to a wireless network.
MUNET is preparing to update its software.
Note: Mute status is not indicated.
MUNET is in WiFi setup mode.
MUNET is under WiFi scanning.
MUNET software update in progress.
Note: Whilst a software is being updated, do not disconnect
the internet connection of your MUNET for at least 10 minutes.
ENGLISH
25
8/1/14 4:56 pm