Publicité
Les langues disponibles
Les langues disponibles
V ..............................volts
A ..............................amperes
Hz............................hertz
W.............................watts
min .........................minutes
or AC .............alternating current
or DC
....direct current
n o ...........................no load speed
...........................Class I Construction
(grounded)
...........................earthing terminal
..........................safety alert symbol
...........................Class II Construction
(double insulated)
.../min or rpm...revolutions or reciprocation
per minute
Wh ..........................Watt Hours
ASSEMBLY
WARNING:
repair the appliance
Charging the battery (HLVA325JP)
WARNING:
supplied charger.
From new, the rechargeable cells of the product need a
minimum charge time of 16 hours to ensure full power.
•
The switch must be in the off ("O") position, the product
will not charge if it is in any other position.
•
Figure B - Plug the jack plug
charging socket
11
of the tool. Plug the charger into
any standard 120 Volt 60 Hz electrical outlet.
Fig. B
10
•
While charging, the charger may get warm, this
is perfectly normal and safe. It is safe to leave the
appliance connected to the charger indefinitely. The
charger automatically reduces power consumption
when charging is complete.
WARNING:
at ambient temperatures below 39°F (4°C) or above
104°F (40°C).
Do not attempt to modify or
For use only with the
10
of the charger into the
Do not charge the battery
Charging the battery (HLVA325BP)
WARNING:
supplied charger.
•
Before first use, the battery must be charged for at least
6 hours.
•
Place the appliance on the charging base
it is not in use as shown in Figure C.
•
Plug the charger into any standard 120 Volt 60 Hz
electrical outlet.
WARNING:
empty all contents and dry thoroughly if needed to avoid
damage to your appliance.
•
Make sure the appliance is switched off. The battery will
not be charged when the on/off switch
position.
nOTE: While charging, the charger may become warm. This
is normal and does not indicate a problem. The appliance
can be left connected to the charger indefinitely.
nOTE: Remove the pet head before charging.
Fig. C
WARNING:
at ambient temperatures below 39°F (4°C) or above
104°F (40°C).
USE
Switching on and off (Fig. D)
•
Figure D - To start, slide the On/Off switch
(i.e. "O"= Off, "I" = On).
•
To stop, slide the switch back.
•
Return the product to the charger immediately after use
so that it will be ready and fully charged for the next
use. Ensure that the product is fully engaged with the
charger plug.
English
For use only with the
whenever
7
Before charging, be sure to
is in the on
1
Do not charge the battery
1
forward
3
Publicité
