[FP MANUAL]
Push the [MODE] button, and select the flash
mode. (P13)
≥ The optimum camera to subject distance and
guide number (GN) matching the digital camera
settings are shown on the display panel.
A: Optimum camera to subject distance
1
Turn the [GN/ISO] dial and set the
guide number (GN) so that the
camera to subject distance is set
to the distance to the subject.
≥ The [F] dial can also be used for this
setting.
≥ If the optimum camera to subject distance
is closer than 0.6 m (or 0.5 m for close-up
photos), the lighting range of the flash will
shift. In this case, the user is warned by
the flashing of the number on the display.
≥ The optimum camera to subject distance
changes depending on the digital camera
settings (ISO sensitivity, aperture, focal
length and shutter speed).
2
Push the shutter button all the
way down, and take the photo.
18
VQT0Z62
A
GN/ISO