HQ Power HQDA10002 Mode D'emploi page 5

Rear Panel
9 – MIC input.
6.35 jack input for the connection or a microphone.
10 – RCA inputs.
RCA jack inputs for the connection of audio devices with a line-level output, e.g. PC, CD
player, TV set...
11 – Speaker outputs.
Outputs for the connection of speakers.
12 – Ventilation fan.
13 – AC power socket.
5. Connection
Decide where the appliance is to be physically installed – it can be used free-standing or
mounted in a standard 19" rack requiring two rack spaces. When installed, makes sure
that both the front and the rear panels are unobstructed and that there is good
ventilation around the entire unit.
Before switching on the appliance, make sure the appliance is switched off and the
volume controls are at their minimum position. It is never a good idea to power up any
amplifier that is not connected to loudspeakers.
Use the correct connectors to connect the appliance to the loudspeakers and sound
system.
6. Care and Maintenance
Cleaning
•
Disconnect from the mains before any cleaning operation.
•
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh
chemicals, cleaning solvents or strong detergents.
Long Periods of Non-Use
•
Disconnect from the mains during long periods of non-use.
Service
This appliance should be serviced when:
•
The power cord or the plug has been damaged.
•
Objects have fallen or liquid has been spilled into the appliance.
•
The appliance has been exposed to rain or water.
•
The appliance does not appear to operate normally.
•
The appliance has been damaged.
Maintenance
Do not attempt any inspection or maintenance by yourself. Refer all servicing to
qualified personnel.
Fuse Replacement
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
3. Open the fuse holder and replace with an identical fuse.
4. Insert the fuse holder back in its place, replace the rear cover and reconnect
power.
V. 02 – 05/03/2020
HQDA10002
5 ©Velleman nv