Télécharger Imprimer la page

HQ Power HQDA10002 Mode D'emploi page 4

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Where the mains plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
This appliance may require the use of a different line cord, attachment plug, or
both, depending on the available power source at installation. Connect this
appliance only to the power source indicated on the appliance's rear panel. To
reduce the risk of fire or electric shock, refer servicing to qualified service personnel
or equivalent.
3.
General Guidelines
Refer to the Velleman
manual.
All modifications of the device are forbidden for safety reasons. Damage caused by
user modifications to the device is not covered by the warranty.
Only use the device for its intended purpose. Using the device in an unauthorised
way will void the warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by
the warranty and the dealer will not accept responsibility for any ensuing defects or
problems.
Nor Velleman nv nor its dealers can be held responsible for any damage
(extraordinary, incidental or indirect) – of any nature (financial, physical...) arising
from the possession, use or failure of this product.
Keep this manual for future reference.
4.
Overview
Front Panel
1 – Power switch.
Press the power switch to switch the amplifier on or off.
2 – Volume control.
Adjust the volume to control the signal output of channels A and B.
3 – SD port.
Insert your SD/MMC card into this slot to play MP3 or WMA files.
4 – USB port.
Insert your USB device into this slot to play MP3 or WMA files.
5 – Display and media player.
6 – DSP control.
7 – IR sensor.
8 – USB controls.
V. 02 – 05/03/2020
®
Microphone control: Adjust the echo and voice changer.
o
Line control: EQ Set + Play DRC + MIC and LINE volume.
o
MODE: Press to select the USB, SD, Bluetooth
o
: Press to play/pause the selected track.
o
REC FOLDER: Press to select a directory in a connected USB device.
o
REPEAT: Press to select a repeat mode (all, one or random).
o
: Press to replay the selected track or to select the previous track.
o
: Press to select the next track.
o
HQDA10002
Service and Quality Warranty on the last pages of this
4
®
or Line input function.
©Velleman nv

Publicité

loading