Velleman VR-GEAR2 Mode D'emploi page 6

6.2 Adjusting the VR-GEAR2 Viewer
1. Put on the VR-GEAR2 3D viewer. Adjust the head strap so it sits firmly
onto your head.
2. Adjust the eye distance of the lenses.
3. Adjust the lens focus. Rotate the lenses as shown below until the
image is clear. The lens focus should be based on your visual comfort.
6.3 Viewing Recommendations
 We advise to watch no more than two hours continuously. If you feel
your eyes are tired, please have a pause to alleviate eye fatigue and
continue only when your eyes have sufficiently rested.
V. 03 – 05/05/2015
VR-GEAR2
6 ©Velleman nv