Tecsis P3307 Mode D'emploi page 14

3. Signs, symbols and abbreviations / 4. Function / 5. For your safety
3. Abbreviations, signs and symbols
Potential danger of life or of
!
severe injuries.
Warning
Potential danger of life or
of severe injuries due to
catapulting parts.
Warning
Potential danger of burns
due to hot surfaces.
Caution
-wire Two connection lines are intended for the voltage supply.
The supply current is the measurement signal.
3-wire Two connection lines are intended for the voltage supply.
One connection line is intended for the measurement signal.
4. Function
The pressure prevailing within the application is transformed into a standardised electrical
signal through the deflection of the diaphragm, which acts on the sensor element with the
power supply fed to the sensor. This electric signal changes in proportion to the pressure and
can be evaluated correspondingly.
5. For your safety
Select the appropriate pressure sensors with regard to scale range, perfor-

!
mance and specific measurement conditions prior to installing and starting
the instrument.
Warning
Observe the relevant national regulations (e.g.: EN 50178) and observe the

applicable standards and directives for special applications (e.g. with
dangerous media such as acetylene, flammable gases or liquids and toxic
gases or liquids and with refrigeration plants or compressors). If you do not
observe the appropriate regulations, serious injuries and/or damage can
occur!
14 Betriebsanleitung/Operating instructions/Mode d'emploi/Instrucciones de servicio
Notice, important informa-
tion, malfunction.
The product complies with
the applicable European
directives.
GB