Team Orion Advantage ONE Duo Mode D'emploi page 6

CHARGING
 Charging NiMH/NiCd batteries
 Connect the battery to the charger using the charge
lead connectors.
 Press the ENTER key until the fans start spinning, the
charge has started.
 Once the charge is completed, press ENTER to display
the final charge data.
 Press ENTER to return to the main screen.
 Disconnect the battery.
 Charging LiPo/LiFe batteries
The charger can charge LiPo/LiFe batteries with or without
balancing. We recommended to always use balancing as
it is the safest charge mode. When using balancing, the
charger can detect certain defects with the individual cells
and adjust/stop the charge accordingly. Without balancing
this is not possible and may result in overcharged cells
which could cause accidents. Depending on the cells
unbalance and battery status, the charge will take more
or less time to complete.
WARNING! If you decide to charge without balancing,
make sure you understand the extra risks involved. Char-
ging without balancing increases the risk of personal injury
or damage to property.
6 - English
 Connect the battery to the charger using the charge
lead connectors.
 Connect the balancing plug to the appropriate balance
port
 Press the ENTER key until the fans start spinning, the
charge has started.
 Once the charge is completed, press ENTER to display
the final charge data.
 Press ENTER to return to the main screen.
 Disconnect the battery.
Note: you can stop the charge process at any time by
pressing the ENTER/STOP key. In LiPo/LiFe mode, you
can press the SET key to display individual cell voltage.
STORING THE BATTERIES
We recommend storing the batteries about 50% charged,
not full or empty. To achieve this when the battery is empty,
you can start a charge cycle and stop the charge when the
mAh counter reaches about 50% of the battery capacity.
ADVANCED SETTINGS
The advanced settings menu offers extra settings which
although they are not required for standard use, offer extra
functionality.
Team Orion Advantage ONE Duo