Malfunctions - Aqualytic AL664EXI Mode D'emploi

12. Malfunctions

Your appliance is designed and manufactured for a lengthy, reliable operating
life with no malfunctions. If a malfunction nonetheless occurs during operation,
check whether it is due to an operating error. Please note that even during
the warranty period the resultant servicing costs in this case will have to be
borne by the owner.
You may be able to rectify the following faults by checking the possible
causes yourself:
• Appliance does not function:
– Is the appliance switched on?
– Is the plug correctly fitted in the mains socket?
– Is the socket fuse intact?
• Loud running noise:
– Is the appliance set up firmly on the floor?
– Does the appliance cause nearby items of furniture or objects to vibrate?
Ensure that the appliance is stable and that all parts at the back can vibrate
freely. If necessary, carefully bend those components in contact with something
else.
Please note that noises caused by the refrigerant circuit cannot be avoided.
• The temperature is not low enough:
– Is the temperature setting correct (see "Setting the temperature")?
– Does the separately installed thermometer show the correct reading?
– Is the ventilation system working properly?
– Is the appliance set up too close to a heat source?
If none of the above causes apply and you cannot rectify the fault yourself,
contact the nearest customer service department stating the type of appliance,
service/index number and appliance number as indicated on the type plate.
The type plate is located in the refrigerator compartment on the left-hand
side.
13. Shutting your appliance down
If your appliance is to be shut down for any length of time, switch it off and
disconnect the plug or remove the fuse. Clean the appliance and leave the
door open in order to prevent unpleasant smells.
17 Rev_5 05/2012