Bourgini Panther Mode D'emploi page 8

EN
the moving parts when using, cleaning or servicing
the appliance.
• Heating devices: wait until the appliance has cooled
down before you touch the housing and parts of
the unit.
Be extra careful during cleaning and servicing.
APPLICATION
• The kettle may only be used to boil water. The
appliance is not suitable for boiling other liquids.
• Use only tap water. Never use carbonated water!
FEATURES
The kettle has the following features:
• On/off switch with illuminated on-off indicator
• Water level indicator
• Lid
• Removable filter
PLACEMENT OF THE APPLIANCE
• Place the appliance on a stable, level and
spatter-free heat-resistant surface.
• Make sure there is enough space around the
appliance for the heat to escape and for sufficient
ventilation.
• Do not cover the appliance.
• Make sure the kettle does not come into contact
with flammable materials.
• Keep the appliance away from heat sources.
• Make sure that children have no access to stored
appliances.
ADDITIONAL SAFETY INSTRUCTIONS
• The lid of the kettle must be closed during
use. When the lid is not properly closed, the
steam cut-off will not work! Check whether the
removable filter has been correctly placed in the
kettle. Do not omit the filter. If you do, the steam
cut-off system will not work.
• Be careful with hot water and steam so as to avoid
burns.
• Only use the base that came with the appliance.
• Never take the kettle off the base when it is
switched on.
• Only switch the appliance on once the kettle is filled
with sufficient tap water.
• Do not move the kettle when it is in use.
• Make sure the water level is always between the
minimum and maximum markings on the water
level indicator before switching on the appliance. If
you exceed the maximum water level, the kettle will
boil over and hot water could be forcefully sprayed
over the edge.
FIRST USE
• Clean the appliance and accessories. See the
section titled "Cleaning".
• Remove the kettle from the base.
• Fill the kettle with tap water to the maximum
marking on the water level indicator.
• Boil the water. See the section titled "Boiling water".
• Do not use the water you just boiled for
consumption or anything else. Allow it to cool
and then pour it down the drain.
BOILING WATER
• Always remove the appliance from the base
before filling it with tap water.
• Open the lid and check whether the removable
filter is properly placed.
• Fill the kettle with water until the water level is
somewhere between the minimum and maximum
markings on the water level indicator.
• Close the lid and place the kettle on the base.
• Switch the kettle on by turning the on/off switch
to "I". The on/off indicator light will illuminate.
The appliance will start to boil the water.
• Once the water has boiled, the kettle will
automatically switch off and the on/off indicator
light will go out.
• Turn the on/off switch to position "O" to interrupt
the boiling process.
CLEANING AND MAINTENANCE
• Unplug the appliance and wait for it to cool down.
• Never immerse the appliance in water or any
other liquid.
• Do not use any acerbic or abrasive cleaning
products to clean the appliance.
• Do not use sharp objects to clean the appliance.
• Check the appliance for possible damage on a
regular basis.
• Clean the exterior of the kettle with a soft, moist
cloth. Then dry it thoroughly with a dry cloth.
• Clean the removable filter with soapy water and
then rinse it under running water. Then dry it
thoroughly with a dry cloth.
• Clean the base using a clean, dry cloth.
DESCALING
When to descale?
• The kettle needs to be descaled after every 25 uses.
• Damage caused to the appliance through irregular
descaling is not covered by the warranty.
Descaler
• Only use a suitable descaler to descale the kettle.
This will be indicated on the packaging of the
descaler. Suitable descalers are available in
supermarkets and stores selling household items.
8