Indexa VT37SET Mode D'emploi page 25

Cause
The power supply is interrupted
The connection between the outdoor station and the
indoor station has been interrupted
The cable is too long or its cross section is too small
It is produced by acoustic feedback
The power supply is interrupted
The connection between the outdoor station and
the indoor station has been interrupted
The outdoor station needs additional light in order
to be able to display a good image
Your viewing angle to the monitor [1] is
unfavourable
There is too much backlighting in the background
Remedy
Check the power supply
Check the connection and polarity
Use a suitable cable (wire cross section at least
0,8 mm², max. length 70 m)
Place the indoor and the outdoor stations further apart
from each other
Check the power supply
Check the connection and polarity
Arrange additional lighting
Change the mounting height of the indoor station or
adjust the monitor brightness [14]
Install additional lighting or change the installation
location of the outdoor station
Indexa GmbH
Paul-Böhringer-Str. 3
74229 Oedheim
Germany
www.indexa.de
Subject to change
GB - 25