Alarm; Setting The Alarm Time - ADE BR 1703-1 Mode D'emploi

Pay attention to the following:
Use the
If you connect the audio cable to the radio during
audio playback via Bluetooth, it will switch
automatically to the AUX input.
The track control is carried out exclusively via the
external audio device.

Alarm

Setting the alarm time

To set the alarm time, the device must not be
in radio mode.
If there is more than approx. 8 seconds
between two pushes of a button, the setting
process automatically ends and you will have
to repeat it.
1. Press and hold the
display
2. Briefly press
The alarm time hour digit will flash on the display.
3. Use or
4. Briefly press
5. Use or
6. Then press
Shower radio BR 1703-1 | 1703-2
button to mute the radio.
button until ON is shown on the
again.
to set the desired wake-up hour.
again.
to set the desired wake-up minute.
.
39