EIBENSTOCK EDB 480.1 Notice Originale page 14

Technical Data
Double Blade Sword Saw
Rated voltage:
Power input:
Order Number:
Frequency:
Stroke rate at no load:
Cutting length:
Stroke:
Thread connection:
Protection class:
Degree of protection:
Net weight:
Interference suppression:
Available accessories:
Saw blades 2pcs. universal
Content of Delivery
EDB 480.1 with saw blades 2pcs, tool kit and operating instructions in a
carton.
Application for Indented Purpose
The double blade sword saw EDB 480.1 is intended for professional use. It
may be operated only when completely assembled according to the
assembly instructions. With use of the respective saw blades, the EDB 480.1
is used to cut poroton (up to strength class 20), gas concrete, wood and
insulating materials.
Cutting in walls with mortar and plaster can damage the saw blades.
Use only saw blades recommended by the manufacturer.
Safety Instructions
Safe work with the machine is only possible if you read
this operating instruction completely and follow the
instructions contained strictly.
Additionally, the general safety instructions of the leaflet
supplied with the tool must be observed. Prior to the first
use, the user should absolve a practical training
Work concentrated and carefully. Keep your work place clean
and avoid dangerous situations.
EDB 480.1
230 V ~
1800 W
06644000
50 - 60 Hz
2200 spm
480 mm
38 mm
special
II
IP 20
about 6,1 kg
EN 55014 and EN 61000
14
110 / 120 V ~
1600 W
Ordernumber:
37452000