What is included in the box
Supply of this TV includes following parts:
1x TV
2x AAA bateries
1x Warranty card
1x Stand
1x Stand neck
1 x TV stand instalation
packet
* - Only for models with 3D function
Wall mounting the TV
This television requires a VESA 100 wall mount,
or equivalent.
1. Remove the four screws highlighted below.
2. The wall mount can now be easily attached to the mounting
holes on the rear of the TV. These holes are indicated in the
picture below.
1x Remote control
1x User guide
1x RF cable
3D glasses *
For optimum viewing, if wall mounting the TV higher than eye
level, the TV should be tilted downwards so that the TV's screen
is 'face on' . See fi g 1 and 2
TV
TV
fi g 1
Wrong
Viewing angle
Viewing angle
Important Note
Position the TV close to the wall to avoid the possibility of it
falling when pushed.
The instructions shown below are a safer way to set up the TV,
by fixing it to the wall, avoiding the possibility of it falling for-
wards if pulled. This will prevent the TV from falling forward and
causing injury. This will also prevent the TV from damage.
This method is used if the TV is placed on a glass surface or you
do not wish to screw anything into your furniture.
Ensure that children do not climb or hang onto the TV.
For this type of installation you will need a fastening chord
A) Using one/both of the top wall-mounting holes and screws
(the screws are already supplied in the wall mounting holes)
fasten one end of the fastening chord/s to the TV.
B) Secure the other end of the fastening chord/s to your wall.
TV
fi g 2
Correct
Viewing angle
Viewing angle
21