Contest NIGHTFURY Guide De L'utilisateur page 18

NIGHTFURY - LEDs cross projector with flashes
4 - Description
1
1 - Suspension bracket
Allows you to fix the NIGHTFURY on a hook.
2 - DMX and SOUND LED
This LEDs give you some indications about
the modes
- DMX blinking slowly when the DMX is
activated
- SOUND light on the beat of the music
3 - Display
The display allows you to configure your
projector.
4 - AUTO and SLAVE LED
This LEDs give you some indications about
the modes
- AUTO light on when the NIGHTFURY is set
in this mode
- SLAVE light on when the NIGHTFURY is set
in this mode
5 - Micro adjustment
Allows to adjust the microphone sensitivity
Page 18
2 3 4
9
8
6 - Safety eye
You must use a safety chain when you hook
the NIGHTFURY.
7 - DMX input and output
Allows to daisy chain the DMX from a controller
or a Master NIGHTFURY to other DMX products.
8 - Power input/output socket
Allows you to connect the projector to an
electrical outlet.
9 - Fuse
If need to replace the fuse, please make
sure the new fuse has exactly the same
characteristics as the original one.
5
6
7