The door was frequently opened.
The door is not properly closed.
Encrusted ice inside the appliance.
The current temperature setting is
too warm
Warm or hot food inside the
appliance.
The appliance is overfilled.
The door seals are damaged.
The door is not properly closed.
The door seal is damaged or soiled.
T
HE DOOR MAKES A STRANGE SOUND WHEN OPENED
The door seals are soiled.
C
OMPRESSOR DOES NOT START IMMEDIATELY AFTER HAVING CHANGED THE
Normal operating condition.
The appliance is not installed on a
flat and level ground. The appliance
touches a wall or another object.
Frozen food is stored improperly.
Items have dropped behind the
appliance.
If the appliance shows a malfunction not noted on the schedule above or if you
have checked all items on the above schedule but the problem still exists, please
contact the aftersales service.
T
HE OPERATING PROCEDURES DESCRIBED BELOW ARE NORMAL
The refrigerant generates a sound similar to flowing water.
Sometimes you may hear a sound which is generated by the injection process of
the cooling circuit.
The sides of the appliance may get warm while the appliance is running.
U
NSATISFACTORY COOLING CAPACITY
S
TRONG FORMATION OF ENCRUSTED ICE
SETTING
U
NUSUAL NOISE
AND DO NOT INDICATE A MALFUNCTION
Select a different setting if necessary.
Check the door/door seals.
Defrost the appliance.
Close the door.
Clean/replace the door seal.
Clean the seals.
.
The compressor will start after a
while.
.
Install the appliance properly.
Store food properly.
Remove the items.
57
.
.
.
.