Paramètres Network - Eaton Network Card-MS Manuel Utilisateur

6.4.2 Paramètres Network
6.4.2.1 "getNetwork"
But Obtenir les paramètres réseau
Syntaxe getNetwork [option1] [option2]...
options :
DHCP
IPAddress
IPMask
IPGateway
HostName
DomainName
IPv6Enable
IPv6AutoConf
IPv6Address1
IPv6DefaultGateway
IPv6LocalAddress
IPv6Address2
PrimaryDNS
SecondaryDNS
FirmwareUpgrade
Exemples #> getNetwork IPAddress
6.4.2.2 "setNetwork"
But Modifier les paramètres réseau
Syntaxe setNetwork [option1=xxxx] [option2=yyyy]...
options :
DHCP = 0|1 (0=No, 1=Yes)
IPAddress = "xxx.xxx.xxx.xxx"
IPMask = "xxx.xxx.xxx.xxx"
IPGateway = "xxx.xxx.xxx.xxx"
HostName = "xx..xx"
DomainName = "xx..xx"
IPv6Enable = 0|1 (0=No, 1=Yes)
IPv6AutoConf = 0|1 (0=No, 1=Yes)
IPv6Address1 = "xx.xx/xxx"
PrefixLength = xx
IPv6DefaultGateway [= ]
PrimaryDNS = "xx..xx"
SecondaryDNS = "xx..xx"
FirmwareUpgrade = 0|1 (0=No, 1=Yes)
Exemples
#> setNetwork IPAddress=xxx.xxx.xxx.xxx IPMask=xxx.xxx.xxx.xxx
(1)
Commentaires : Ecriture possible selon la valeur du paramètre "DHCP"
(2)
: Ecriture possible selon la valeur du paramètre "IPv6Enable"
Network Management Card – Manuel Utilisateur
(1)
(1)
(1)
(2)
(3)(4)
(3)
(3)
34003990XT_FR/EG Page 88/119