Danby Designer DAR044A4WDD Guide D'utilisation Et Soins De Propriètaire page 6

FEATURES
A) Wire Shelves
(Number and type of shelves depends on the model.)
Shelves can be arranged on any of the rails inside the appli-
ance. It is protected against being pulled out accidentally. If
you want to remove a shelf, slightly lift up the front part and
pull it out. Perishable foods should be stored towards the
back/rear of the shelves.
B) Door Liner
The door liner consists of various shelves or holders used for
storing eggs, cheese, butter and yogurt as well as other
smaller packages, tubes, cans etc. The lower shelf is used
for storing large bottles.
C) Defrost Water Outlet
The interior of the refrigerator is cooled with a cooling plate
mounted in the rear wall. Under the plate there is a channel
and an outlet for defrost water. Regularly check the defrost
water outlet and the drain channel for blockage. They should
always be kept free and clear of food particles. If the drain
outlet does become clogged, use plastic straw to clear it.
CHANGING THE DIRECTION OF
THE DOOR SWING
CAUTION: To avoid personal injury to yourself and/or property, we recommend someone assist you during the
door reversal process.
If you find the direction of opening the door on your appliance inconvenient, you can change it. Holes on the opposite side
have already been prepared in the factory. See figure below for a guide to the components that must be removed and
switched to the other side.
INSTALLATION INSTRUCTIONS
4