Page 2
Product support at 1.866.907.0122 (09:00 - 17:00hrs PST) or email technical@blubathworks.com North America Blu Bathworks Inc. 188 Smithe Street, Vancouver BC, Canada, V6B 6A9 T+1.604.299.0122 F+1.604.299.0125 Please refer to blubathworks.com for warranty, terms & conditions under warranty & procedure for warranty service.
Page 3
EN - INSTALLATION GUIDE Unscrew the locking nut (1), remove the washer bracket 2). Make sure the Escutcheon Trim for the mixer body (4) including o-ring is on the mixer body (4). Position the mixer, screw the washer bracket (2) on the threaded stem (3) then tighten everything with the lock nut (1).
Page 4
EN - MAINTENANCE Unscrew the lever (1) and the grub screw (2) using the supplied allen wrench (3). Remove the handle (4). Unscrew the ring nut (5) using the supplied key (6). Extract the cartridge (7). To fit, proceed in reverse order, making sure the reference pins at the bottom of the cartridge (7) are correctly positioned in the corresponding seat inside the tap body (8) and the support surface is perfectly clean (fig.9).
Page 5
EN - CLEANING/MAINTENANCE For correct cleaning of the tap, wash it only with solvent-free products. DO NOT use detergents containing corrosive or acid substances (hydrochloric, acetic or phosphoric acid), abrasive sponges and metallic scouring pads. It is advisable to use specific products for stainless steel, such as Flitz stainless steel &...