NGM Dynamic MAXI Guide Rapide page 30

Managing the two USIM cards
From the main menu, select Settings > Dual SIM Settings. Select the I/O switch next to
the phone operators corresponding to "USIM1" and "USIM2" in order to selectively
activate or deactivate the USIM at any time. From this menu you can also customize the
color and name for each USIM icon and decide which USIM to use as default for calls,
messages and data connection, by choosing "always ask" if you don't want to set any SIM
as default. In Settings > Mobile Networks > 3G Service, you can select the SIM card on
which you would like to activate the 3G service. This is an innovative function that allows
you to move 3G from one SIM to the other without the need to physically switch SIM cards.
MANAGING CALLS
From the main screen touch the Phone icon; use the virtual keypad to enter the desired
phone number.
Press the dial icon and then the desired SIM if you haven't set a default SIM for calls,
otherwise, the call will start with the default SIM.
To end the call press the red end call key.
To answer a call, drag the light to the right onto the green phone icon; to reject it, drag it
to the left onto the red phone icon, to reject with a message bring the handset up. To
silence an incoming call, tap Volume "+ "or "-" (on the right side of the phone).
30 ENGLISH