Rexing V1 Max Guide De Démarrage Rapide page 9

Step 2: Insert the Memory Card
The Rexing
higher] Micro SD memory cards up to 256GB. You will
need to insert a memory card before you can begin
recording. Before inserting or
card, first
device.
Gently
hear a click, and allow the spring release to push the card
out.
Step 3: Power the Camera and Format the
Memory Card
Power the
the car cigarette lighter and camera. To ensure the V1
Max records
without error. Before you start using a new memory
card, you must format the card within the camera
using the format function. Always backup important
data stored on the memory card before formatting.
To format the memory card, make sure you have
inserted your memory card, then turn on the device by
connecting to a power source.
recording. Then press the
the System Setup Menu. Use
buttons and go to the Format setting. Press the OK
button to confirm the selection.
V1 Max accepts
ensure you've
push the memory card in until you
camera by
to your memory
[Class
removing
powered
connecting the
card
Press
MENU button twice to enter
the
10/UHS-1
a memory
down the
charger
properly and
REC
to stop
REC MIC
and
or
to
9