Extel O'MOUV HD Guide D'installation Et D'utilisation page 106

Tap the ADVANCED SETTING icon to setup camera confi guration. (Please refer to
"Advanced Setting" for detail).
Tap the DELETE icon to remove the camera connection.
Tap the EVENT LIST icon to check or playback the recorded events. (Please refer to
"Playback Your Video" for detail).
The INFORMATION icon allows you to enable PIN lock, push notifi cation function
and check the App information.
SETUP PIN LOCK
If you enable PIN Lock, the user will be asked to enter the PIN code when you launch the APP.
1. Enable the "Enable lock when starting" function. Then enter your PIN code.
2. Confi rm your PIN code again.
Note:
If you forgot your PIN code, please uninstall the APP and reinstall it on the mobile device.
NOTIFY (PUSH NOTIFICATION)
The WAPP camera supports motion detection function. When any event is detected in the camera site, you'll
receive push notifi cation on the mobile devices for the event recognized by the camera.
For iOS
If you want to enable/disable it, please follow the steps on your iOS mobile device:
1. Launch Settings from your Home screen.
2. Tap Notifi cations.
3. Scroll down to fi nd "OMGuard HD" APP and tap on it.
4. Switch the toggle to ON/OFF in Notifi cation Center.
Note:
It takes time for the changes to take effect in iOS, normally within 2 hours.
GB13
CFI EXTEL O'MOUV HD - 10/2015
(iOS) (Android)