Publicité
Les langues disponibles
Les langues disponibles
1 0 c m
Make sure to use screws and wall mounts that
meet the VESA standard. Standard dimensions for
the wall mount kits are described in the following
table.
43UV340C
Model
43UV340H
VESA (A x B)
200 x 200
Standard screw
M6
Number of screws
4
Wall mount bracket
LSW240B
(optional)
MSW240
65UV340C
Model
65UV340H
VESA (A x B)
300 x 300
Standard screw
M6
Number of screws
4
Wall mount bracket
LSW350B
(optional)
A
B
• Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
• When using the wall mount, it is recommended
that you apply a piece of tape over the Stand
holes to prevent dust and bugs from entering
the holes. (Depending upon model)
Stand Hole
8
10 c m
(4 in c h e s )
1 0 c m
10 c m
49UV340C
49UV340H
55UV340C
55UV340H
55UV342H
300 x 300
M6
4
LSW350B
MSW240
75UV340C
600 x 400
M8
4
LSW640B
Connections (Notifications)
You can connect various external devices to the TV.
Supported external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices. For
more information on external device's connection,
refer to the manual provided with each device.
• The external device connections shown may
differ slightly from illustrations in a manual.
• Connect external devices to the TV regardless
about the order of the TV port.
• If you connect a gaming device to the TV, use the
cable supplied with the gaming device.
• Refer to the external equipment's manual for
operating instructions.
• In PC mode, there may be noise associated
with the resolution, vertical pattern, contrast
or brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the Picture menu until the picture is
clear. Depending upon the graphics card, some
resolution settings may not allow the image to
be positioned on the screen properly.
• Some USB Hubs may not work. If a USB device
connected through a USB Hub is not detected,
connect it directly to the USB port on the TV.
• When connecting via a wired LAN, it is
recommended to use a CAT 7 cable.
Connecting to an Antenna or Cable
Connect an antenna, cable, or cable box to watch
TV while referring to the following. The illustrations
may differ from the actual items and an RF cable is
optional.
• Make sure not to bend the copper wire of the RF
cable.
Copper wire
Publicité
