Publicité
Les langues disponibles
Les langues disponibles
8.
When the appliance has switched itself off automatically, place the main
function switch to OFF.
9.
Remove the plug from the power socket and wait until the appliance has
cooled itself down.
10. Then clean the grill and baking area with a cloth lightly moistened with
water and then dry it carefully.
Switching off and transportation
Switching off
Set the main function switch and the timer switch to OFF position. Unplug
•
the power plug from the socket.
Transporting
If you wish to transport the oven to a different location, first allow it to cool
•
down.
Remove the power cord from the socket.
•
Wind the power cord around the bracing hooks at the back of the
•
appliance.
Operation
Grilling and baking
1. Remove the roasting grill and baking tray from the appliance. If required,
cover these with baking paper resp. smear the baking tray with butter or oil.
2. Allow the appliance to heat up for ca. 10 minutes (dependant on the
setting) to the required temperature:
- Select the required temperature with the temperature control knob.
- For grilling, you must always select the highest temperature (230° C).
- Then, select with the function switch either upper heat (e.g. for toppings),
lower heat (e.g. for cakes) or upper and lower heat (e.g. for Pizza). If you
want to grill, always select the setting upper heat with the function switch.
- With the time switch set the pre-heat time (ca. 10 minutes).
- Close the glass door.
3. When the warm-up period is finished, place the foodstuffs on the roasting
grill resp. the baking tray and slide it in on one of the runners. Ensure that
there is sufficient space between the foodstuffs and the inner walls/heating
elements of the appliance.
The most uniform baking results are obtained when the baking tray
resp. the roasting grill are placed on the central runner.
Instructions Manual
English
5
Publicité
