Chargingâtheâtablet; Insertingâaâmemoryâcard - Coby Kyros MID7022 Série Guide De Démarrage Rapide

ChargingÂtheÂTablet
The tablet comes with a built-in rechargeable lithium-
polymer battery.
Before using the tablet, the battery should be charged
fully. The Status Indicator will light green when the bat-
tery is charged fully.
To charge the battery:
1. Plug one end of the included power adapter into an
AC 100-240V outlet.
2. Plug the other end of the included power adapter into
the Power jack on the tablet.
3. Disconnect the power adapter when the tablet is fully
charged.
The battery used in this device may present a fire
or chemical burn if mistreated. Do not disassemble,
incinerate, or heat the device. Do not leave the de-
vice in a place subject to direct sunlight, or in a car
with its windows closed. Do not connect the device
to a power source other than that which is indicated
here or on the label as this may result in the risk of
fire or electric shock.
Page 11
InsertingÂaÂMemoryÂCard
The tablet accepts microSD memory cards. Insert a
memory card into the microSD card slot to:
 Increase the memory capacity of your tablet
 Play media files stored on the memory card (e.g.,
music, video, or photo files).
To insert a memory card:
1. Align the memory card with the card slot. The metal
contacts of the memory card should face down
reverse the LCD screen.
2. Slide the card into the spring-loaded slot. Push the
card in until it clicks into place.
Do not attempt to insert objects other than a
microSD memory card into the card slot. A com-
patible memory card should fit easily into the
card slot; if you encounter resistance, check the
alignment of the card. Do not attempt to force
the card in.
Avoid touching the gold contacts of the memory
card.
Getting To Know The Mid7022