The Appliance Is Working, But Not Very Well, Check; The Appliance Is Noisy, Check; The Light Does Not Work, Check; The Door Will Not Close Properly, Check - Amica WCF1K Série Mode D'emploi

The appliance is working, but not very well, check

• The appliance is not overloaded.
• The thermostat is set to an appropriate temperature.
• The door is closing properly.
• The door gasket is sealing properly
• There is enough ventilation at the side and rear walls.
• The ambient temperature is between 16°C to 32°C.

The appliance is noisy, check

• The appliance is level and stable.
• The cooling gas will make some noise, even when the compressor is
not running.
• During operation, it is normal for the fan to run, even when the com-
pressor is not running.

The light does not work, check

• There is power to the appliance.
• The house fuses or circuit breakers are intact and the fuse in the plug
has not blown.
• The light button is not set to off.
Please note:
The LED lighting cannot be replaced without a service call

The door will not close properly, check

• The appliance is level and stable.
• If the door has been removed, it may not have been correctly refit-
ted.
• The door seal is dirty.
• The shelves are not positioned correctly.

The display shows "E1" or "E2"

• The temperature sensor has failed. Please contact Call Center

EPREL

For more information about the product, please refer to the EU EPREL
Product Database at https://eprel.ec.europa.eu. For more information,
please use your mobile device to scan the QR code on the energy label
or enter the product model listed on the energy label in the EPREL
search engine https://eprel.ec.europa.eu/
- 23 -