THOMSON Dandy Série Mode D'emploi page 21

We advise you to operate the toaster without inserting bread for first
use.
1. Connect the toaster to the power outlet and turn the outlet on if
necessary.
2. Set the thermostat to the lowest position.
3. Lower the lever and let the appliance heat.
4. Wait until the smell dissipates.
5. Press the
OPERATING YOUR APPLIANCE
1. Make sure your toaster is plugged in and the outlet is switched on.
2. Insert one or two slices of bread into the slots and lower the lever until
it locks.
3. The toaster automatically heats and the bread begins to toast.
4. Set the thermostat according to how brown you want your toasts to be.
5. You can stop the toaster at any time by pressing the
6. Lift the lever from time to time to check the browning of the bread.
7. When the cycle is finished, the lever will raise up automatically. You may
withdraw your toasts safely.
8. If the bread is not sufficiently toasted you may restart again.
9. Set the thermostat to a lower position and put the bread into the
slots. Make sure that your toasts will not burn during the second
cycle.
•
THERMOSTAT
The thermostat can be set from 1 to 7. The higher the setting, the
longer the toast time.
- 1 - 2 : Lightly toasted
3 - 4 : Medium
-
5 - 7 : Very dark
-
•
REHEAT FUNCTION
Your toaster can be used to reheat toasts that cooled too quickly.
Put the bread into the toaster.
-
Set the thermostat to a lower position.
-
" button to raise the lever
EN - 09
" button.