Publicité
Les langues disponibles
Les langues disponibles
To check the correct installation of the filter, switch on the ash cleaner and press the dust-
shaking switch five times as shown. The filter is clean and correctly installed if the suction
power is sufficient.
6.
Use
General Use
1. Before using the ash cleaner, make sure to install the filter and to fix the cover to the
collector with the clips.
2. Attach the flexible hose to the ash collector.
3. Connect the appliance to the mains. Switch on the appliance.
Vacuuming Ashes
Leave the ashes to completely cool down prior to vacuuming them!
1. Check if the device is assembled well before using it.
2. To vacuum ashes, connect the hose to the suction connection.
3. Insert the power plug into the mains socket.
4. Switch on the device.
5. Vacuum the cold ashes.
6. Switch off the device.
7. Unplug the device from the mains.
8. Remove the cover from the ash collector.
9. Throw away the ashes in an environmentally safe way.
V. 01 – 28/01/2019
TC90601
7
©Velleman nv
Publicité
