TooQ TQEP-500SP Guide De L'utilisateur page 10

• 2 x Connectors MOLEX.
• 1 x Connector FDD.
Power supplies are intended to be installed by professional staff or technical service.
Basic guidelines for installation and started:
1.Following the instructions on the PC case, open it and remove the previous power
supply by disconnecting all the connections and removing the screws that secure the
power supply to the PC. Then place the new power supply in the same place.
2. Locate and connect the ATX, 20 or 20+4 pin main connector on the motherboard. If the
motherboard has only 20 pins, separate the additional 4 pins.
Pin Description Color
1 +12.0V Yellow
2 COM Black
3 COM Black
4 +5.0V
Pin Description Color
1 +12.0V Yellow
2 COM Black
3 COM Black
4 +5.0V
10
Red
Red