Channel List; Manual Register - Emerson LD195EMX Guide D'utilisation

Channel List

The channels selected here can be skipped when selecting the channels
using [CH K / L ].
Those channels can still be selected with [the Number buttons].
1
Press [SETUP] to display the main menu.
2
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
or
3
Use [Cursor K / L] to select "Channel List", then press
[ENTER].
or
4
Use [Cursor K / L] to select the channel you want to
remove, then press [ENTER].
or
• The channel display for the removed channel
darkens. You will not be able to select the channel
again using [CH K / L ].
• To reactivate a removed channel, use [Cursor K / L] and
press [ENTER]. The registered channels are highlighted.
• When you remove a main channel, its subchannels
are removed as well.
Note:
• The channel with the "DTV" indicated on the display is
ATSC. Otherwise the channel is NTSC.
5
Press [SETUP] to exit.
This function lets you add the channels that were not added by
the autoscan due to the receptible condition at the initial setting.
1
2
3
Channel
Channel
Autoscan
Channel List

Manual Register

Antenna
4
Channel List Channel List
Highlight channels for Ch
DTV DTV 6 6
Up/Down key selection.
27
DTV 8
DTV 8
9
9
DTV DTV 48 48
58 58
DTV 67
BACK
Ch Select Watch/Skip Back
ENTER
5
Español
Manual Register
Press [SETUP] to display the main menu.
Use [Cursor K / L] to select "CHANNEL", then press
[ENTER].
or
Use [Cursor K / L] to select "Manual Register", then
press [ENTER].
or
Use [the Number buttons] to enter the number of the
channel you want to add, then press [ENTER].
Press [SETUP] to exit.
Note:
• If setup completes successfully,
"Added to the channel list" is displayed.
• If external input is used, it is not possible to register the
channel and "Unavailable" will be displayed on the TV
screen.
• By using [CH K / L ], you can select the memorized
channels only.
Français English
Channel
Channel
Autoscan
Channel List
Manual Register
Antenna
11
Manual Register Manual Register
Register
For analog channels, select a
channel to register using number
keys.
For digital channels, you must
perform Autoscan function.
BACK
Back
Ch Change
21
EN