Publicité
Les langues disponibles
Les langues disponibles
Cleaning, Care & Maintenance
If grease is permitted to accumulate, it will begin to carbonise into a hard substance that is extremely
difficult to remove. To prevent this, follow the cleaning steps below:
•
Always turn OFF the appliance and disconnect from the power supply before cleaning.
•
Allow the appliance to cool before cleaning.
•
Use warm, soapy water and a damp cloth to clean the exterior of the appliance.
•
Take care when using scrapers to remove cooking residues as they can damage the cooking surface.
•
Dry thoroughly after cleaning.
•
A BUFFALO dealer or qualified technician should carry out repairs if required.
Scraping
•
After each use, scrape the appliance with a scraper/grill stone/copper brush or flexible spatula to
remove excess fat and food. A waste tray is provided for the scrapings if necessary.
•
If there is an accumulation of burned fat or food, the cooking surface should be thoroughly scoured
and re-seasoned.
Note: It is vital that the cooking surface is re-seasoned after scouring.
Warning: Do not use steel wool as it may leave shards that could Contaminate
food.
Waste tray
•
This appliance features a waste tray to collect any liquid or fats that run off during cooking.
•
At least once a day, remove and empty the waste tray before washing with warm, soapy water.
•
Do not allow the tray to overfill, or excess grease will run out of the overflow hole at the front of the
tray.
Warning: Do not remove the tray during or immediately after use as the
contents will be hot.
Note: The waste tray for the DB193/DB167 slots inside the appliance.
DB193_DB167_ML_A5_v2 20200402.indb 5
UK
5
2020/4/2 17:15
Publicité
