Publicité
Les langues disponibles
Les langues disponibles
Road Ready Seat Protector
Thank you for purchasing the Road Ready Seat Protector
With normal care and proper treatment, it will provide years of reliable service.
Please read all operating instructions carefully before use.
SPECIFICATIONS
Dimensions
Material
CARE AND MAINTENANCE
•
Machine or hand wash in cold water only.
•
Air dry only—do not tumble dry.
•
Do not iron.
•
Do not dry clean.
INSTALLATION
1. Tuck seat anchors into the crevice in the back of the vehicle seat.
2. Connect the buckle straps around the headrests.
3. Secure the elastic straps beneath the vehicle seat.
4. Open the zippers all the way up to feed the seatbelts through the seat
protector. Rezip and close the zippers all the way down
5. Open hook-and-loop flaps to access seatbelt buckles
6. If needed, open vertical zippers to access center armrest.
… Headrests needed for proper installation!
1
by Wagan Tech
™
Item 6601 (Large)—54" maximum width
Item 6602 (Small)—51" maximum width
Polyester
www.wagan.com
®
by Wagan Tech
™
.
®
Publicité
