Publicité
Les langues disponibles
Les langues disponibles
Additional Safety and Working Instructions
Use protective equipment. Always wear safety glasses when working with the
machine. The use of protective clothing is recommended, such as dust mask,
protective gloves, sturdy non-slip footwear and ear defenders.
The dust produced when using this tool may be harmful to health. Do not inhale
the dust. Use a dust absorption system and wear a suitable dust protection mask.
Remove deposited dust thoroughly, e.g. with a vacuum cleaner.
Always keep the connection cable from the working area of the device. Always
guide the cable backwards, away from the device!Do not machine any materials
that present a danger to health (e.g. asbestos).
When working in walls ceiling, or floor, take care to avoid electric cables and gas
or waterpipes.
Please turn the device immediately off when the tool used gets blocked! Do not
turn the device on again when the tool is still blocked. This could cause bounce
back with a high reaction moment. Determi-ne and remove the cause of the
blocking of the tool used while respecting the safety instructions.The possible
causes may be:
• it is tilted in the workpiece to be machined
• it has pierced through the material to be machined
• the power tool is overloadedDo not reach into the machine while it is running.
Chips and splinters must not be removed while the machine is running.
WARNING! Danger of burnsThe insertion tool may become hot during use.
• when changing tools
• when setting the device down
Adapt the feed speed to avoid overheating the blade tips and to avoid melting
plastic materials during cutting.
DESCRIPTION OF THE SYMBOLS
1.
Safety symbols
The use of symbols in this manual is intended to draw your attention to possible
risks. The safety symbols and the explanations that accompany them must be
perfectly understood. The warnings in themselves do not remove the risks and
cannot replace correct actions for preventing accidents.
This symbol, marking a point of safety,
indicates a caution, warning or danger.
Ignoring this warning can result in an
accident to yourself or others. To limit the
risks of injury, fire or electrocution, always
follow the recommendations indicated.
WARNING – To reduce the risk of injury,
user must read instruction manual
Before any use, refer to the corresponding
section in this user manual.
WARNING Always wear ear protection, eye
protection, dust mask and gloves when using
the product.
WARNING Always wear eye protection.
Complies with relevant EU regulations.
GB
98| 99
4/2017
Publicité
