Samsung 8 Série Mode D'emploi page 15

Adjusting the camera angle
The initial shape of the camera
The adjustment part of the
camera's angle
Initial setup
The initial setup dialogue box appears when the TV is first activated. Follow the on-screen instructions to finish the initial setup
process, including the selecting the menu language, scanning channels, connecting to the network, and more. During each
step, either make a choice or skip the step. You can manually perform this process at a later time in the
- If you connect any device to
automatically.
- If you do not want to select
Password Change
>
System Change PIN
Changing the TV's password.
1. Run Change PIN and then enter the current password in the password field. The default password is "0-0-0-0".
2. Enter a new password and then enter it again to confirm it. The password change is complete.
- If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to "0-0-0-0":
For the Standard Remote Control: In Standby mode:
For the Samsung Smart Control: When the TV turns on:
Volume up →
RETURN
To adjust the camera angle downwards
Simultaneously press the TV camera
and adjust the angle.
before starting the installation, the
HDMI1
Set-top box , please select Aerial
MUTE
English - 15
To adjust the camera to the front
Put your finger on the adjustment part
of the camera's angle and adjust the
angle upwards, pulling it in the direction
of the arrow.
Channel Source
.
→ 8 → 2 → 4 →
POWER
→ Volume up →
MUTE RETURN
> menu.
System Setup
will be changed to
Set-top box
(On)
→ Volume down →
RETURN
→