Timer Mode - Auriol Z31793 Instructions D'utilisation Et Consignes De Sécurité

Timer mode

In Timer mode, 3 time fields appear. A timer is provided in each of
the three fields (Fig. D).
Setting the desired time
Press and hold the T1 key
the key flashes, thus signalling that a time can be set.
Press the SEC key
change the displayed values for seconds (SEC), minutes
(MIN) or hours (HR) in steps.
TIP: Press and hold the key to make the numbers change
more quickly.
Press the T1 key briefly to confirm your setting. The display of
Timer 1 stops flashing and shows the set time.
Set the timers next to the T2
way.
Activating set timers
The timer is in Timer mode and the selected timer displays the
selected time.
Press the T1 key
counter now begins counting down to 0. When the set time
has elapsed, a signal tone will sound for the period of one
minute. The timer display flashes, the message „TIME'S UP"
for 3 seconds. The field next to
10
, the MIN key
4
and/or T3 keys
9
again to activate the topmost timer. The
10
or the HR key
3
in the same
8
to
2
GB/IE 13