VONROC OT501DC Traduction De La Notice Originale page 7

SAFETY WARNINGS FOR BATTERY
a) Do not open the battery. Danger of short-
circuiting.
b) Protect the battery against heat, e. g., against
continuous intense sunlight, fire, water, and
moisture. Danger of explosion.
c) In case of damage and improper use of the bat­
tery, vapours may be emitted. Ventilate the area
and seek medical help in case of complaints.
The vapours can irritate the respiratory system.
d) Use the battery only in conjunction with your
Vonroc product. This measure alone protects
the battery against dangerous overload.
e) The battery can be damaged by pointed objects
such as nails or screwdrivers or by force applied
externally. An internal short circuit can occur and
the battery can burn, smoke, explode or overheat.
SAFETY WARNINGS FOR CHARGER
Intended use
Charge only CD801AA and CD803AA type rechargea-
ble Battery packs with the charger. Other types of bat-
teries may burst causing personal injury and damage.
a) The appliance is not to be used by persons
(including children) with reduced physical, sen­
sory or mental capabilities, or lack of experien­
ce and knowledge, unless they have been given
supervision or instruction.
b) Children being supervised not to play with the
appliance.
c) Do not recharging non­rechargeable batteries!
d) During charging, batteries must be placed in
the well ventilated area!
ELECTRICAL SAFETY
Always check that the voltage of the power
supply corresponds to the voltage on the
rating plate.
• Do not use the machine if the mains cable or
the mains plug is damaged.
• Only use extension cables that are suitable
for the power rating of the machine with a
minimum thickness of 1.5 mm
tension cable reel, always fully unroll the cable.
2. MACHINE INFORMATION
Intended use
Your multitool has been designed for light sanding,
sawing and scraping applications.
WWW.VONROC.COM
TECHNICAL SPECIFICATIONS
Model No.
Batteries included
Chargers included
Voltage
No load speed
Weight
Sound pressure
level LPA
Sound power level
LWA
Uncertainty (K)
Vibration (sawing
in steel)
Uncertainty (K)
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No.
Battery Type
Voltage
Capacity
Recommended charger
Weight
. If you use a ex-
2
This manual has been drawn up for
different sets / article numbers. Check the
corresponding article number in below
specifications table for the correct
composition and contents of your set.
S_
OT501DC
OT501DC
- CD801AA
-
20V
5000-18000 /min
0.96 kg
81.8 dB(A)
92.8 dB(A)
3 dB(A)
4.657 m/s
1.5 m/s
CD801AA
Lithium-Ion
20V
2.0 Ah
CD802AA
0.3 kg
CD803AA
Lithium-Ion
20V
4.0 Ah
CD802AA
0.65 kg
EN
S2_ S3_
OT501DC OT501DC
2 x
CD803AA
CD801AA
CD802AA
2
2
7