Technical Data - Jonsered LM 2146 CMD Manuel D'utilisation

on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
Engine
Brand
3
Displacement, cm
Speed, rpm
Nominal engine output, kW
Ignition system
Spark plug
Electrode gap, mm
Fuel and lubrication system
Fuel tank capacity, litre
Oil tank capacity, litre
2
Engine oil
Weight
With empty tanks, kg
3
Noise emissions
Sound power level, measured dB (A)
Sound power level, guaranteed L
(A)
4
Sound levels
Sound pressure level at the operator's
ear, dB (A)
1
The power rating of the engine indicated is the average net output (at specified rpm) of a typical production
engine for the engine model measured to SAE standard J1349/ISO1585. Mass production engines may differ
from this value. Actual power output for the engine installed on the final product will depend on the operating
speed, environmental conditions and other values.
2
Use engine oil of quality SJ or higher. See the viscosity chart in the engine manufacturer's manual and select
the best viscosity based on the expected outside temperature.
3
Noise emissions in the environment measured as sound power (L
2000/14/EC.
4
Noise pressure level according to ISO 5395. Reported data for noise pressure level has a typical statistical
dispersion (standard deviation) of 1.2 dB (A).
868 - 003 - 23.10.2018

Technical data

LM 2146 CMD
Briggs & Strat-
ton
125
2900
1
1.6
NGK BPR6ES
0.5
0.8
0.5
SAE 30/SAE
10W-30
30
95
dB 96
WA
80
service or the shop from where you purchased the
product.
(Fig. 53)
LM 2146 CMDA LM 2146
CMDAE
Briggs & Strat- Briggs & Strat-
ton ton
140 163
2900 2900
2.21 2.5
RC12YC AUTOLITE 3924 BPR5ES
0.5 0.5
0.8 1.0
0.5 0.5
SAE 30/SAE SAE 30/SAE
10W-30 10W-30
33 30.5
94 97
94 98
80 84
) in conformity with EC directive
WA
LM 2146
CMDAH
Honda
145
2900
2.9
0.5
0.95
0.4
SAE 30/SAE
10W-30
35.4
95
95
81
15