Caratec Vision CAV190B.2 Notice D'utilisation page 59

5. Main Menu
Funktion
ATV Manual Tuning
1
DVB-C Manual Tuning
DVB-T Manual Tuning
1
Programme Edit
Signal Information
CI-Information
Dish Setup
2
5V antenna power 1
Input Source DTV // Input Source Satellite
1 2
Smart-D function DiSEqC settings for automatic dish alignment
For the use with a compatible Caratec Smart-D dish.
1. In the Channel Menu select Dish Setup.
2. Select the appropriate setting under DiSEqC 1.1 (see table):
Satellite Setting
HotBird 13E LNB 1
Astra 19.2E LNB 2
Eutelsat 5W LNB 3
Astra 23.5E LNB 4
It is sufficient to make settings only for the satellites used (e.g. Astra 19.2E und Hotbird 13E).
Automatic Channel Search/Receiver Settings
1.
In the Channels Menu select the automatic channel search function (Auto Tuning).
> The Receiver Settings Menu (Tuning Setup) is displayed.
With Satellite selected as source:
Function
Country
Satellite
Scan Mode
* recommended settings are printed in bold
Erklärung
Begin manual channel search for the selected source
„ATV Manual Tuning" menus are displayed.
Beginning manual channel search for selected source. „DVB-C Manual
1
Tuning" or „DVB-T Manual Tuning" menus are displayed
Organising, deleting, skipping, marking as favourites. „Programme
Edit" menu is displayed.
Show signal information of the station.
Show information on an inserted CI card.
See chapter „6. CI-Modul" on page 29
Erasing, managing, re-setting satellites and transponders.
Menu „Dish Setup" is displayed. Perform Fast Scan and set DiSEqC
Turning set on with an active antenna in order to feed 5V to the antenna.
Satellite
Turksat 42E
Astra 28.2E
Eutelsat 16E
Eutelsat 9E
Explanation
Set country
Set satellite
 Full*
 Network Scan
Setting Satellite
LNB 5 Astra 4.8E
LNB 6 Thor 0.8W
LNB 7 Amos 4W
LNB 8 Hispasat 30W
Funktion
Channel Type
Service Type
 continue on the next page
CaratecVision
Setting
LNB 9
LNB 10
LNB 11
LNB 12
Explanation
All Channels*
 FTA Channels
 All*
 DTV
 Radio
59