Setting Up Your Tv ("Initial Setup") - Sony Trinitron WEGA KV-SW21 Mode D'emploi

x Setting up your TV ("Initial Setup")
When you turn on your TV for the first time, the "Initial Setup" menu will
appear. You may change the menu language, preset the TV channels
automatically, sort or edit the channels and adjust the picture position using the
buttons on the remote control or TV top control panel.
1
Press V or v to select the desired menu
language, then press
The selected menu language appears.
2
Press V or v to select "Yes", then press
to preset the channels automatically.
The screen will indicate automatic
presetting is in progress.
After all available channels have been tuned
and stored, the "Program Sorting/Edit"
menu appears automatically on the screen.
To skip automatic channel presetting, select
"No", then press
If the message "No channel found. Please
connect cable/antenna" appears, check your
TV connections, then press
3
The "Program Sorting/Edit" menu enables
you to sort and edit the channels.
a) If you wish to keep the channels in the
current condition, press WEGA GATE
to exit.
b) Press V or v to select the program
number with the channel you wish to
change. The selected channel will
appear on the screen.
c) If you wish to store the channels in a
different order:
1) Press b to enter sorting mode.
2) Press V or v to select the new
program number position for your
selected channel, then press B.
.
.
.
End
Select Confirm
End
Select Confirm
Program:
01
TV System: Auto
VHF Low
End
Program Sorting/Edit
PROG Label Skip
01 Off
02
Off
03
Off
04
Off
Sorting: Edit:
Select Confirm Exit
Program Sorting/Edit
PROG Label Skip
01 Off
02
Off
03 01 Off
04 Off
Sorting mode
Select Confirm Exit
continue
5