Publicité
Les langues disponibles
Les langues disponibles
•
N ever immerse the appliance, the power cord or the plug in water or other liquid. After washing the filters
make sure they are thoroughly dry before returning them to the appliance.
operAtion - General
The appliance is intended only for domestic use, not
for professional use.
1. Telescopic tube
2. Hose
3. Hose connector
4. Hose grip
5. Mechanic suction pressure control at the handle
6. Combi nozzle
7. Motor unit
8. Cover
9. Cover release button (dust bag)
10. Vacuum-cleaner handle
11. Rear wheels
12. Swivelling front wheel
13. Cord-rewind button
14. On/Off switch
15. Indicator, "dust bag full"
16. Crevice tool
17. Exhaust filter
18. Storage bracket
19. Electronic suction pressure control
operAtion - Before use for the first time
1. Verify that a dust bag is fitted. Fit a dust bag, if necessary. See 'Changing the dust bag'.
operAtion
1. R otate the hose connector into the hose opening
on the motor unit to the right (see Figure 2a). To
remove the hose, rotate the connector to the left
and pull the connector from the hose opening.
2. T he power cord has a yellow and red mark, see
Figure 2b. Pull out the cord to the yellow mark.
N ever pull out the power cord beyond the red
mark. This could damage the power cord.
3. P ut the plug in the wall socket, and press the
On/Off switch. To switch off the appliance, press the On/Off switch again, see Figure 2c.
4. T he appliance is now ready for use. You can move the vacuum cleaner while you are cleaning by pulling
on the hose grip. You can lift the appliance with the vacuum cleaner's handle, see Figure 2e.
5. Y ou can adjust the vacuum suction with the vacuum suction control, see Figure 2d. It is advisable to
reduce the vacuum suction when cleaning upholstered furniture and curtains. This will prevent the fabric
from being sucked into the nozzle.
12 18
7
8
10
19
15
13
14
18
17
11
a
22
user's instructions
4
5
16
2
1
3
9
6
b
d e
c
Publicité
