KEUCO Royal Lumos Instructions D'utilisation page 3

Read all instructions before using or installing this product.
Symbols and their meaning
Caution! Warning of personal injury or material
damage
Caution! Warning of electric shock.
Caution! Warning of water damage.
Note, tip or reference
Correct assembly/functional test
Incorrect assembly
Observe assembly details
Optional/accessories
Button on/off
Lighting above
Lighting below
Light colour - daylight white (cool white)
Light colour warm white
Technical data
– Supply voltage:
– Required electrical outlet:
– Max. power consumption:
Prod. No.:
14311 172X51:
– Maximal load each shelf:
– Maximal load mirror cabinet total:
- 14311 172X51:
– Degree of protection:
– Ambient conditions:
- Operating temperature
- Storage temperature
– Luminous color
Mounting dimensions, see page 11.
120V AC 50Hz/60Hz
15 A / 1800 W
Width Weight
25-9/16" 43.4 lb
max 3.3 lb
NEMA 1
32° – 113° F
-40° – 158° F
2700 – 6500 Kelvin
Operation
As with a multiway switch, the mirror cabinet
can be operated with the sensor button A on
the mirror, or with an external light switch B
(installation type I or III); refer to fi gure 3 on
page 12.
Depending on the type of connection, the
sockets are permanently supplied with voltage
(I or II) or switch controlled (III).
KEUCO recommends connection type I in
combination with a switch for switching on/off .
Before installation check whether the fastening materials
included are suitable for the anchoring base. The fas-
tening materials are suitable exclusively for stud walls
with timber constructions or for drywall constructions with
timber wood reinforcement.
Light
Installation, see fi gure 1 onwards on page 12.
47.7 W
• Check the mounting position, see fi gure 1.
• Remove the doors, see fi gure 2.
• Connect the mirror cabinet to the power supply,
56.7 lb
see fi gure 3.
• Place the mirror cabinet in the installation opening,
see fi gure 4 on page 13.
• Fix the mirror cabinet in the installation opening
with the screws, see fi gure 5.
• Reinstall the doors, see fi gure 6.
• Glue the batten under the mirror cabinet to cover the
gap that may be present, see fi gure 7.
• Place the glass shelf holders in the mirror cabinet,
see fi gure 8 on page 14.
• Place the glass shelves in the mirror cabinet,
see fi gure 9.
• Adjust the doors of the mirror cabinet, see fi gure
10 – 12 on page 14 and 15.
A
´
= BLACK
L
= WHITE
N
= GREEN
PE
= RED
L
US
B
3