Panel Control - LDLC Pro Touch 27 Guide D'utilisation

PANEL CONTROL

 Power Button:
Press this button to switch ON/OFF of monitor's power.
 Power Indicator:
Green — Power On mode.
Amber — Power Saving mode.
 MENU / RETURN:
Turn the OSD menu on/off or return to the previous menu.
 Adjust ꓥ or ꓦ:
1. Adjust Brightness and volume when the OSD is off.
2. Navigate through adjustment icons when OSD is ON or adjust a function when function
is activated.
i/
ENTER button:

i/
1. Press ENTER to enter Source selections. (VGA, HDMI) when the OSD Menu is OFF.
i/
2. The ENTER button is used to validate your selections in the OSD menu.
3. Press and hold this button more than 3 seconds will start 「Auto Adjust」 function
when using VGA input only. (The auto adjustment function is used to optimize the
「horizontal position」, 「vertical position」,「clock」,and 「phase」.)
Hotkeys:

1. Restore Brightness and Contrast defaults:
To reset both the Brightness and Contrast to their default values, enter in the OSD
Brightness/Contrast menu, and press the ꓥ and ꓦ keys at the same time.
2. ASPECT RATIO:
Press MENU + ꓦ keys to change to 「FULL MODE」 or 「FIT」.