Sony Alpha ILCE-7RM2 Mode D'emploi page 37

Grid Line
Marker Display
Marker Settings
Audio Level Display
Auto Review
DISP Button
Peaking Level
Peaking Color
Exposure Set. Guide
Live View Display
Disp. cont. AF area
Phase Detect. Area
Pre-AF
Zoom Setting
Functions that can be selected using the MENU button
Sets a grid line display to enable alignment to a structural
outline.
(Rule of 3rds Grid/Square Grid/Diag. + Square Grid/Off)
Sets whether to display the marker on the monitor when
recording movies.
(On/Off)
Sets the marker displayed on the monitor when recording
movies.
(Center/Aspect/Safety Zone/Guideframe)
Sets Audio Level Display.
(On/Off)
Sets auto review to display the captured image after shooting.
(10 Sec/5 Sec/2 Sec/Off)
Sets the type of information to be displayed on the monitor or
in the viewfinder by pressing DISP on the control wheel.
(Monitor/Finder)
Enhances the outline of in-focus ranges with a specific color
when focusing manually.
(High/Mid/Low/Off)
Sets the color used for the peaking function.
(Red/Yellow/White)
Sets the guide displayed when exposure settings are changed
in the shooting screen.
(Off/On)
Sets whether to reflect settings such as exposure
compensation in screen display.
(Setting Effect ON/Setting Effect OFF)
Sets whether or not to display the focus area in [Continuous
AF] mode.
(On/Off)
Sets phase detection AF area.
(On/Off)
Sets whether to perform auto focus before the shutter button
is half pressed.
(On/Off)
Sets whether to use the Clear Image Zoom and Digital Zoom
when zooming.
(Optical zoom only/On:ClearImage Zoom/On:Digital Zoom)
GB
GB
37