FS IPC201-2M-D Guide De Démarrage Rapide page 10

4. Take off the transparent dome cover by loosening screws.
5. Connect all cables of the ceiling and the camera.
6. Secure the camera to the ceilingl by leading the self-tapping screws
through the guide holes in the base and fix them by using a
screwdriver.
NOTE:
The installation process above is concealed installation, during
which holes are drilled in the ceiling and tail cable is led out from the top
of the camera. Cables are connected and frapped at the ceiling side to
prevent messy cables from affecting camera mounting. If open installation
is adopted, tail cable is led out from one side of the camera and can be
routed from the side groove of the camera.
7. Adjust the monitoring direction of the lens horizontally or vertically
by rotating the lens base or loosening the fastening screws. Tighten
the screws after vertically adjusting the lens.
NOTE: Please stop rotating the camera when the lens is blocked, otherwise
the camera lens might be damaged.
EN 9