hestan KSO 30 Manuel D'utilisation Et D'entretien page 24

Masquer les pouces Voir aussi pour KSO 30:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

USING THE OVEN
USING THE MEAT PROBE
This oven is provided with the meat probe feature to sense the temperature inside meat and
stop cooking as soon as the set value is reached. In a double oven, it is available only in the
EN
upper cavity.
The following modes can be selected to work with the meat probe:
Other modes will not start if the probe is inserted.
1. Insert the probe into the meat and place the meat in the oven. Insert the probe connector
into the receptacle. (See "OVEN FEATURES" on page 8 .)
2. Once the probe has been inserted in its connector and detected by the control, turn the
cooking mode knob into a valid position. PROBE appears on the display with the selected
function.
• The meat probe standard temperature (170° F) flashes on
the display for 5 seconds.
3. To change the probe set point, use the
• The standard probe temperature set-point is 170° F.
• The allowed range is between 130° F and 210° F.
• The temperature is displayed in steps of 5° F or 2.5° C for setting and actual values.
4. After 5 seconds the value on the display is accepted and the control starts cooking.
• The actual probe temperature is then displayed.
5. Set oven temperature with the knob as usual.
The maximum cavity temperature during cooking with meat probe is 475° F.
6. Touch
touch
7. As soon as the set probe temperature is reached, the control sounds an end of cooking tone
and stops the oven.
• Always turn the cooking mode to the OFF position before reusing the oven.
The PROBE message flashes when the mode is not valid for cooking with probe. If the probe is
removed during cooking, or in case of a short or open circuit, a fault message will be displayed.
Automatic time functions are disabled when using the meat probe, only the timer can work.
22
©2019 Hestan Commercial Corporation
(CONT.)
COOK MODE SELECTOR
CONVECTION BAKE
CONVECTION ROAST
BAKE
or
once to check the probe set temperature. When the temperature flashes,
+
or
further or hold to modify the value.
+
DISPLAY VALUE
CONV BAKE
CONV ROAST
BAKE
/
keys.
+

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Kdo 30KsoKdo

Table des Matières