Toolland WKH3000B Mode D'emploi page 5

5.4 Slackening the Cable
1. Pull the spring [5] in the direction of the arrow (see A).
2. Steadily push the lever until the drive pawl pushes and disengages the stop pawl [2] to clear the
ratchet [3]. This will release the load one notch.
3. Repeat this motion as required until the cable is sufficiently slackened.
When releasing the load, avoid abrupt movements. Apply a steady pressure to
6. Cleaning and Maintenance
There are no user-serviceable parts inside the device. Refer to an authorized dealer for service and/or spare
parts.
Occasionally wipe with a damp cloth to keep it looking new. Do not use harsh chemicals, cleaning solvents or
strong detergents.
7. Technical Specifications
max. cable length ............................................................................................................. 3 m
cable diameter .............................................................................................................. 5 mm
hook dimensions ........................................................................................................ 103 mm
working capacity ........................................................................................................ 1500 kg
Use this device with original accessories only. Velleman nv cannot be held responsible in the event
of damage or injury resulting from (incorrect) use of this device. For more info concerning this
product and the latest version of this manual, please visit our website www.toolland.eu. The
information in this manual is subject to change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman nv. All worldwide rights reserved. No part of this
manual may be copied, reproduced, translated or reduced to any electronic medium or otherwise without the
prior written consent of the copyright holder.
V. 01 – 04/03/2016
WKH3000B
WARNING!
the handle.
5 ©Velleman nv