Beeper Professional RWEC99X Manuel D'installation Et D'utilisation page 7

Thank you for choosing a product line BEEPER for protection and comfort of your vehicle. BEEPER products were designed and produced to your
complete satisfaction. We recommend you have this product installed by a professional and read this guide for a perfect use of the product.
1. Composition of sets ............................................. ...........................................................
2. Before installation .............................................. .............................................................
3. Installation of the screen and camera ......................................... ......................................
4. Monitor and camera connection ................................................. ......................................
5. Guarantees & assistance ............................................. .....................................................
6. Declaration of conformity ................................................. ................................................
1. COMPOSITION OF SETS
RWEC99X
7" TFT LCD monitor
RWEC99X/24
7" TFT LCD monitor
2. BEFORE INSTALLATION
Thank you for choosing the brand for your BEEPER combined rear vision. Before using this system, please read the instructions that follow to
guide you through the installation and future use of this product.
• Follow the regulation of your country
• For safety reasons, it is best not to handle or see the monitor while driving. Park your car in a safe location to observe the monitor and
manipulate the system.
• Do not insert your hand, finger or other object within the system when the monitor is running. This can cause damage and malfunctions. Keep
small objects out of reach of children.
• After long exposure to the sun, let the system cool before reuse.
Installation
Thank you for the following tips before the installation of the system:
• For your comfort and safety please observe the following link to install this product.
• The monitor should be placed at a location with good visibility for the driver.
• The location of the monitor should not affect the use of operating the car, airbags and other systems.
• The system runs on 12 V DC (or 24V depending on model). Be sure the vehicle voltage and polarity of each wire.
• Before installation, if all vehicle components are working properly such as contact & engine start switch codes, and fog lights, flashing lights,
heating, air conditioning, power door locks, ... Check after installing all these elements.
Camera Cable 20 m.
Camera Cable 20 m.
RWEC99X version EN
P.7
P.7
P.8
P.9
P.10
P.10
Monitor bracket
Monitor bracket 24V/12V transformer
P.7
Rear view set 12V.
Rear view set 24V.