Bio Green HMT-A 040-075 Mode D'emploi page 8

Heating mat HMT-A
1. Delivery checklist
1 off Aluminium heating mat incl. thermostat
2. Technical data
Appliance types:
HMT-A 040 – 075
HMT-A 040 – 120
HMT-A 040 – 200
HMT-A 050 – 120
HMT-A 060 – 075
HMT-A 060 – 120
HMT-A 060 – 200
HMT-A 100 – 100
HMT-A 100 – 200
IMPORTANT:
Familiarise yourself with these operating instructions and the general safety and hazard notes before
installation. Keep this document in a safe place for future reference. If you have any doubts about the
safety of the appliance, please consult a specialist. When installing in a greenhouse, please ensure
that the electrical connections are made by a qualified person.
3. General
After unpacking and before using for the first time, ensure that the heating mat and all the accessories
are in good working order. In case of transport damage, please contact the responsible distributor or
the manufacturer immediately. Keep packaging material (polybags, polystyrene, nails etc.) out of
reach of children, since such materials can be hazardous. This also applies to small included items
that can be swallowed.
The electronic heating mat HMT-A has been developed for the following applications:
a) Soil heating on greenhouse tables
b) Soil heating for seed trays
c) Soil heating in cold frames
d) Soil heating for plant overwintering
It is simple to operate and requires very little space for installation. This appliance is certified for
connection to 230 V / 50-60 Hz AC only. It must be protected against heavy soiling and moisture. Any
use other than that described above may damage the appliance and also carries the risk of short
circuits, fire, electric shock, etc. It is imperative that the safety and installation instructions are
followed.
Power:
65 W
85 W
157 W
150 W
93 W
140 W
263 W
150 W
300 W
Power supply:
Control range:
Protection category:
Protection class:
Probe length:
DIN-EN tested
CE certified
Made in the EU
- 8 -
8
EN
230 V / 50-60 Hz
0 – 40 ° C
I
IP X4
approx. 50 cm