Installation - BORETTI M-system MSK-650 Notice D'emploi

(3). Installation

If the model without Glass:
3.1 The cooker hood should be placed at a
distance of 65-75cm (26-30inch) from the
cooking surface for the best effect. See Pic
1.
3.2 Install the hook on a suitable place once
the installation height is fixed, and keep it in
line. The fixed position of the inside
chimney bracket is the place of chimney.
3.3 Fix the outside chimney bracket on the
outside chimney, and be sure that the inside
chimney can be adjusted the height in it freely as well as fixing the
extensible tube dia.:150mm . Afterwards, install the extensible tube
and chimney on the cooker hood. See Pic 3.
3. Put the cooker hood on the hook. See Pic 4.
3.5 Adjust the height of the inside chimney to the position of the inside
chimney bracket and fix on it by screw, after adjusting the position, fix
the body with safety screw. See Pic 5.
Note: The two safety vents are positioned on the back casing, with
diameter of 6mm.
3