Télécharger Imprimer la page

Preparing; Wall Mounting - Goobay TV EasySlide Twin M Mode D'emploi

Publicité

Les langues disponibles

Les langues disponibles

additional tools for Models 63479 and 63480
Wrench

4.2.1 Preparing

Fig. 17: Removing the plastc covers
Fig. 18: Removing the VESA plate

4.2.2 Wall mounting

Fig. 19: Aligning and marking
Fig. 20: Drilling drill holes
1.
Remove the 2 plastic covers of the
TV wall mount (A) by sliding the
upper one obliquely forward and
upward and the lower one forward
and downward.
2.
Remove the VESA plate by loosening
the top nuts slightly, so that they are
still fitting securely on the thread.
3.
Remove the lower nuts counterclock-
wise and completely.
1.
Before drilling, attend to live cables or
other lines lying behind plaster, and
do not damage them.
2.
Use a spirit level to mark the drill
holes on the wall.
3.
Mark the drill holes 1 to 3 with a
pencil.
Use the TV wall plate (A) as template.
4.
Drill the drill holes with a 10mm
concrete drill 60mm deep.
D
27

Publicité

loading